Tunnel and Metros


AppleChemie providing innovative construction chemicals for Tunnel and Metros. Black Cat Enterprises Pvt. Ltd. has two state of art plants for the manufacturing of construction chemicals. The total range covers more than 200 products. Apple Chemie Products normally used for Tunnel and Metros are elaborated for your convenience

POLYUREA

  • Fast cure, short down time, no sagging.
  • Excellent Physiochemical Properties.
  • Bondable and paintable to various kinds of substrates.
  • Ambient insensitive, good thermal stability.
  • 100% Solids, No VOC's, Odorless, No Toxic Vapors.
  • Good resistance to a wide range of chemical attack.
  • Excellent Abrasion resistance and Impact resistance.
  • Good weather ability, Added color stability.
  • Seamless, flexible, slick and non-porous.

AC-MOULD-KOTE

  • Mould release Agent in emulsion form
  • Increases life of formwork.
  • It is a Green building product
  • Leaves no stains on concrete after demoulding.
  • Allows easy demoulding of forms.
  • Allows efficient adhesion of forthcoming plasters,
    mortars & paints.
  • No dirt sticks on surface after its drying.
  • Coated shuttering surface remains clean & free from
    remnants of concrete & cement splashes after demoulding.
  • Bonding strength of concrete remains unaffected.

AC-HYPERCRETE

  • A high performance concrete hyper plasticizer on modified polycarboxylic ether base
  • Higher water reduction in a range ol 30 - 35 percent. making it higtiy suitable for intended use.
  • Increased early and ultimate cornpressive strengths.
  • Increased flexural strergth.
  • Better resistance to carbonation.
  • Lower perrneablity
  • Better resistance to aggressive atmospheric conditions.
  • Increased durability.

AC-MENT-BV-430-PQC

  • Super Plasticizing Admixture
  • Enoellent purmabflity, easy placement and better finish.
  • Higher strength without increase in cement content or reduction in work ability
  • Recommended for P.0,C.
  • Higher Reduction in w/c ratio for high strength concrete.
  • Higher durability, higher irnpermeability with minimum bleeding and segregation

AC-SPRAYSET-163

  • Alkali free set accelerator for wet-mix sprayed concrete
  • Quid: setting properties allow thicker over head layer in single application. 120-200 mm thickness)
  • It allows high work ability & rapid progress of wort.
  • Unique liquid formula allows easy handling & efficient addition at the male of spray gun
  • Environment friendly
  • Impart early higher strength and control. decrease in final strength which normally in case of accelerators.
  • Alkali free nature of product improves work environment & the safety

AC-CEMENT-CAPSULE

  • It is a Cementatious non-shrink grout designed for the anchoring of rebar or dowels in concrete.
    masonry and rock.
  • Simple and economical
  • Easy to install
  • Easy handing and storage
  • Reduces installation time and cost l
  • No product mixing on site
  • No special tools and equipment required
  • Higr early strengths
  • Thixotropic mix
  • Stable water /cement ratio
  • No toxic emanation or fumes
  • Environmental friendly
  • No Calcium Chlorides

AC-HYPERCRETE

  • A high perfommance concrete hyper plasticizer on modified polycarboxylic ether base
  • Higher water reduction in a range of 30-35 percent,making it highly suitable for intended use.
  • Increased early and ultimate compressive strengths.
  • Increased flexural strength.
  • Better resistance to carbonation.
  • Lower permeability
  • Better resistance to aggressive atmospheric conditions.
  • Increased durability.

AC-VISCOFLUX-O2

  • Improves flow of concrete by dispersing the cement particle. A unique mechanisms of
  • a) Electrostatic repulsion
  • b) Steric hindrance by the main polymer chain. leads to great benefit with folowing advantages
    Flow properties even with ruced water content and making it highly suitable for self compacting concrete (S.C.C.)
  • Increased early and ultimate compressive strengths.
  • Increased flexural strength.
  • Improved adhesion to reinforcing and stressing steel.
  • Better resistance to carbonation.
  • Lower permeability
  • Better resistance to aggressive atmospheric conditions.
  • Reduced shrinkage and creep
  • Increased durability.

AC-CURE-(S)-CURING-COMPOUND

When Sprayed on fresh concrete it forms a continuous film and cover the concrete and prevents evaporation of water from it The water added during the concretemixing is sufficenet for the complete hydration of cement and development of full strength of concrete. AC Cure (S) can prevent drying skinkage cracks. Water curing may be reduced. The product confonns to BS: 7542 l ASTM-C-309

AC-SPRAY SET-163

  • Alkali free set accelerator for wet-mix sprayed concrete
  • Quick setting properties allow thicker over head layer in single application. 120-200 mm thickness)
  • It allows high workability 81 rapid progress of work
  • Unique liquid formula allows easy handling efficient addition at the nozzle of spray gun
  • Environment friendly
  • Impart early higher strength and control,decrease in final strength which normally in case of accelerators.
  • Alkali free nature of product improves work environment & the safety.

AC-CEMENT-CAPSULE

  • It is a Cementitious non-shrink grout designed for the anchoring of rebar or dowels in concrete,
    masonry and rock. Simple and conomical
  • Easy to install
  • Easy handling and storage
  • Reduces installation time and cost
  • No product mixing on site
  • No special tools and equipment required High early strengths
  • Thixotropic mix
  • Stable water /cement ratio
  • No toxic emanation or fumes Environmental friendly
  • No Calcium Chloride

AC-CABLE-GROUT

  • Pre-packed, Non-shrink Cementations Grout Admixture for Post Tensioned Cable As per
    ASTM C-827-01A, BIS 110 part 1 1985 and MOST Appendix Sec 1800/IH Gaseous positive
    expansion of the Grout compensates for the Shrinkage and settlement in plastic paste of cement.
  • Makes Grout impermeable
  • Very strong and durable
  • It does not contain chlorides/nitrates/sulphides
  • Compatible with OPC

AC-MOULD-KOTE

  • Mould release Agent in emulsion form (Green Building Product)
  • Increases life of form work.
  • It is a Green building product.
  • Leaves no stains on concrete after demoulding.
  • Allows easy demoulding of forms.
  • Allows efficient adhesion of forthcoming plasters, mortars 8L paints.
  • No dirt sticks on surface after its drying.
  • Coated shuttering surface remains clean 84 free from remnants of concrete 8L cement splashes after
    demoulding.Bonding strength of concrete remains unaffected.

AC-POLYSEAL

  • Recommended for sealing of expansionjoints in movement joints. Conforms to IS 12118
    (part 1 81 2)- 1987, BS 4254 - 1983, BS 5212 - 1990
  • Easy to use and Economical
  • Excellent adhesion with old and new concrete
  • Non- sagging in vertical and overhead joints
  • Good chemical resistance Permanently elastic

AC-FLEX-CL

Carbonation protection coating for portion of Old St New Bridge Works Solvent free, non toxic, safe and non corrosive. Highly carbonation resistant Elastomeric, non stick, good binding, clean and seamless membrane coating, maintains original concrete breathing capacity Solar reflection cum uv-radiation resistant coating

AC-MENT-BV-430-AM6

  • Super Plasticizer for all types of concrete works The Product Confirms IS-9103-1999. It gives:
  • Excellent pumpability, easy placement and better finish.
  • Higher strength without increase in cement content
  • Improved cohesion and less risk of shrinkage cracks.
  • Higher durability & higher impermeability No risk of reinforcement corrosion as the
    product is chloride free.
  • No side effects on concrete or steel.

POLYUREA

  • Fast cure, short down time, no sagging.
  • Excellent Physiochemical Properties.
  • Bondable and paintable to various kinds of substrates.
  • Ambient insensitive, good thermal stability.
  • 100% Solids, No VOC's, Odorless, No Toxic Vapors.
  • Good resistance to a wide range of chemical attack.
  • Excellent Abrasion resistance and Impact resistance.
  • Good weather ability, Added color stability.
  • Seamless, flexible, slick and non-porous.

AC-RAIL-GROUT

  • (Fast Setting, High Strength, Multipurpose, Nonshrink Cementatious Grout)
  • Easy to mix and install
  • It has a self level property
  • Excellent bonding with concrete
  • High initial and final strength
  • Good pourability and workability
  • Bears high static 8L dynamic forces
  • Protects deterioration of reinforcement due to corrosion
  • It has excellent weatherability

AC-DUR-SBA(G)

  • Segment bonding adhesive forjoining of bridge segments. As per As per FIP/ASTM/BS
  • Meets the International 8L National standards (FIP, BS, ASTM etc.)
  • It has high initial strength and ultimate strength.
  • It has high scratch hardness, excellent adhesion 8( high abrasion resistance.
  • Excellent acid, alkali, salt and detergent resistance.
  • Most recommended for segmental construction of bridge and flyover

AC-LOC-FIX

  • Polyster resin anchor grout for bars 81 bolts.
  • Ultra high strength in short time.
  • Corrosion resistant.
  • It can be used in damp conditions.
  • Non explosive.

Hydrophillic Grout for Sand Stabilization

Special Product under Developemnt) You ask, and we will design and deliver. Constant innovation is our work style